Labris LOG - Labris Networks

Labris LOG

Cost-effective and plug&play solution for traffic monitoring, logging and hotspot needs..

Having no need for any change in the network, Labris LOG series can be placed as a network bridge. Bridge ports are preconfigured and ready to use. Labris LOG products are able to listen all ports at the same time, These ports can be in tap or bridge modes. Two ports are required for each bridge. HTTPs protocol can also be identified and time, source, target information is generated about the traffic. Lines carrying more than one IEEE 802.1Q VLANs can be listened by Labris LOG products.

So you can log traffics in enterprise level networks, no extra work is needed. Labris LOG series offer you minimum 500 GB of internal disk storage for your need to store all internet traffic logs in your network. Time-stamping service assures you on log integrity. To remind, the method of storing the logs in an external storage may be risky; results in deletion, elimination or alteration of logs.

Plug & Play

Without any configuration and installation, one can just plug cables and start generating logs of the directed network traffic. Traffic can be monitored through span ports of switches or tap devices or Labris LOG device can easily be used as a network bridge.

Bridge Mode

Having no need for any change in the network, Labris LOG series can be placed as a network bridge. Bridge ports are preconfigured and ready to use.

Multiple Sensors

Labris LOG products are able to listen all ports at the same time, These ports can be in tap or bridge modes. Two ports are required for each bridge.

Vlan Tagging

Lines carrying more than one IEEE 802.1Q VLANs can be listened by Labris LOG products. So you can log traffics in enterprise level networks, no extra work is needed.

Logging Web Traffics

HTTPs protocol can also be identified and time, source, target information is generated about the traffic.

Remote Logging / Log Hosting

Labris LOG products support written of logs to more than one remote server or SYSLOG servers. Over the open iSCSI protocol, Labris LOG is able to connect to the Storage Area Networks (SAN) and keep records. Labris LOG can also be used as a sensor for other log collection solution through syslog feature. In case of your system has other application generating logs compatible to standards, Labris LOG series gives you the chance of storing logs generated by other applications in itself with time stamping service.

Realtime Log Monitoring

Labris LOG appliances allow administrators to monitor the access logs in real time. One can filter the target URL or IP address, to achieve more effective and detailed monitoring.

As is the case with the internet you provide, there must be limitations on who can access and use your wireless service or public computer laboratory. In public networks such as hotel, cafe, restaurant, university campus, college laboratories with varying users, you may need to offer access with greatest possible protection and authentication. Labris WAUTH+ is a HotSpot module helps to authorize and manage the guest wireless users. System can log all access by ID no, password, and IP/MAC matching. You can also define time limited internet access.

Auhentication Features

Authentication through User Info
MAC matching
Multiple authentication methods at the same time (Active Directory, SMS Authentication, Hotel Management Software, LDAP, Reception-Type etc..)
Common Key protection (double layer) for SMS authentication *
Time-based authentication
Mobile payment usage without any procedure and application *
Authentication By-Pass option for permanent users
Authentication for branch office users connected the HQ through IPSec VPN and MPLS VPN
Authentication method activation/deactivation option

Management Features

Time/Bandwidth quote definition for users
Effective bandwidth management support
Modifiable “Welcome” page independent from the browser used
Web based GUI management
Browser-based multilanguage support
Lawful compliance support (Timestamp, on-device logging) *
User-based policy creation
“Sign Out” option for authenticated users
User monitoring and instant management (cut off the user internet with one click)
Multiple network authentication for the user * Please contact us if the feature is supported in your country.

With integrated Detailed Reporting Module, Labris LOG appliances present you detailed reports in PDF, CSV, HTML, etc. formats whenever you want. From these reports, one can see the user characteristics and data transfer amounts in graphics and charts.

As a manager or administrator, it is possible to benefit from these reports to tune security policies in a more effective way.
Quick and Smart Matrix Analysis architecture, it allows you to create reports based on several criteria together by synthesizing them. Without any performance loss, you can get the reports.

Models

Labris LOG

Products

Labris LOG

	LOG10	LOG16	LOG30	LOG60	LOG150	LOG155
Bandwidth (Sniffer)*	16 Mbps	70 Mbps	90 Mbps	150 Mbps	500 Mbps	1000 Mbps
Bandwidth (Log Collection)	160 Mbps	700 Mbps	900 Mbps	1500 Mbps	3000 Mbps	5000 Mbps
Traffic Log Rate *	600 Log/S	1200 Log/S	2500 Log/S	4000 Log/S	8000 Log/S	14000 Log/S
Log Capacity	24 GB	120 GB	1 TB	2 TB	2x3TB	2x4TB
Logview (Instant Monitoring)	-	Included	Included	Included	Included	Included
Redundant Logging	-	-	Op (RAID 1)	Op (RAID 1)	Op (RAID 0,1,5)	Op (RAID 0,1,5)
Remote Logging	Syslog/SAN (iSCSI)	Syslog/SAN (iSCSI)	Syslog/SAN (iSCSI)	Syslog/SAN (iSCSI)	Syslog/SAN (iSCSI)	Syslog/SAN (iSCSI)
Sniffer Ports	2 pcs 100/1000	5 pcs 100/1000	7 pcs 100/1000	7 pcs 100/1000	4 pcs 100/1000	4 pcs 100/1000
LCD / VGA	-	-	20*2 LCD	20*2 LCD	20*2 LCD	20*2 LCD
Options	IPS	IPS	IPS 2 TB Log Capacity Additional 100/1000 Ports & Fiber Ports	IPS 2 TB Log Capacity Additional 100/1000 Ports & Fiber Ports	IPS 2 TB Log Capacity Additional 100/1000 Ports & Fiber Ports	IPS 2 TB Log Capacity Additional 100/1000 Ports & Fiber Ports